Oase biOrb AIR 60, Руководство по эксплуатации, Страница: 21 / 166

- EN -
21
Adjusting the 24h cycle

K
How to proceed:
1. biOrb AIR 60 Close the container cover, then press
and hold the adjustment button for approx. 3 s.
–
The lighting starts in a 24 hour cycle. Each cycle
starts with a continuous lighting increase
(30 min) and ends with a continuous lighting re-
duction (30 min).
– The setting is confirmed by a brief change in the
lighting (reduction and increase).
2. To change the starting time press and hold the ad-
justment button drepessed at the desired starting
time for approx. 3 s.
Setting the automatic misting unit
The humidification volume can be varied depending
on the type of plant.
Recommendation:
•
Low amount of plants: low humidification
•
Medium amount of plants: medium humidification
•
High amount of plants: high humidification
How to proceed:

K
1. Open the biOrb AIR 60 container cover.
–
The setting process is activated.
2. Briefly press adjustment button 1 × .
– The current setting is signalled by the lighting
flashing.
3. To change the humidification amount briefly press
the adjustment button 1 × .
– The setting is signalled by the lighting flashing.
4. Close the container cover.
–
The setting is saved.
Humidification volume Lighting flashes
Low 1 ×
Medium 2 ×
High
3 ×
Setting the fan speed
The fan speed can vary depending on the type of plant.
Recommendation:
• Low amount of plants: low speed
• Medium amount of plants: medium speed
• High amount of plants: high speed
How to proceed:

K
1. Open the biOrb AIR 60 container cover.
– The setting process is activated.
2. Press and hold the adjustment button until the
lighting is extinguished, then briefly press the ad-
justment button 1
×
.
–
The adjustment is signalled by the lighting flash-
ing.
3. To change the fan speed briefly press the adjust-
ment button 1
×
.
–
The adjustment is signalled by the lighting flash-
ing.
4. Close the container cover.
–
The setting is saved.
Fan speed Lighting flashes
Low
1
×
Medium 2 ×
High 3 ×