1. Loosen bottom 2 set screws
(turn counter-clockwise).
2. Turn side set screw in (clock-
wise to rase or counter-clock-
wise to lower) while lightly rais-
ing the arm rest with your other
hand (to make the adjustment
easier).
3. When you have achieved
the desired height, tight-
en the two bottom set
screws (turn clockwise).
DIRECTIONS FOR USE
ADJUSTABLE SIDE ARM RESTS (ACCESSORY OPTION)
CAUTION
•
Do not use the arm rest for client support during the mounting or dismounting of the chair.
•
The arm rest is not designed to support the client’s weight.
TO INSTALL THE ARM RESTS:
The Arm Rests adjust automatically as the back rest moves to remain parallel to the floor.
1. Insert end of arm rest into
backrest hole while holding
the arm rest at a 60° angle
to the backrest.
2. Push end all the way into the hole and drop the arm rest into the
horizontal position. Pull outward to make sure the arm rest is
secure.
TO LEVEL THE ARM RESTS:
The Arm Rest height is adjusted at the factory for each table. If the armrest starts to sag with repeated
use, follow the steps below to readjust.
10
