SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
SYMBOL
IDENTIFICATION
8
DIRECTIONS FOR USE
There will be times when removal of the arm rests will be needed. This feature is
helpful when doing massage or helping someone get on or off the table.
To Remove the Arm Rest:
To remove one or both arm rests just take hold of the base of the arm rest at the
metal frame and somewhere on the cushion. Holding securely, rotate the arm rest
while at the same time pulling slightly away from the table. You will feel the notched
connection slide out as you rotate the arm rest. When you feel this you can then slide
the entire arm rest out of the connection hole very easily. Store it safely until ready for
installation.
Re-attach the armrest by sliding the arm rest frame into the hole on the backrest. Push
it in securely and allow the arm rest to rest in the parallel position. This resets the arm
rest in the proper position for the automatic adjustment feature to be activated.
Removing the Side Arm Rests
A. hand soak bowl installation
B. hand soak bowl removal
C. Manicure surface installation
The manicure arm rest installation follows the same standard installation
and removal instructions as above.
MANICURE ARM RESTS:
A
B
C
Do not place excess
weight on the Side Arm
Rests. Do not use them in
assisting the client on and
off the table
Either Arm Rest can be
repositioned to allow a client
to get on and off the
table easily.
When making adjustments
the arm rests make certain
that The client’s arms are
away from the working
mechanism.
IMPORTANT
CAUTION
Do not sit on the Arm Rests.
SIDE ARM RESTS:
(
C O N T
.
)
• Side Arm Rests
(cont.)
CAUTION
Be sure the arm rest is fully
inserted before lowering.
DIRECTIONS FOR USE
