manualshive.com logo in svg

OAKWORKS Spa Clinician Adjustable Flat Top, Руководство пользователя

Поделиться
Скачать
OAKWORKS Spa Clinician Adjustable Flat Top Скачать руководство пользователя страница 8

INSTALLATION

TABLE ASSEMBLY

STEP 1   

Place the table top upside down on the floor. 

STEP 2   

Each leg has a number by the top bolt that corresponds with a number on the inside corners of the table top. 

(Excluding non-cabinet versions of the Flat top and Back Rest top tables. These legs are universal.)  Pick 

any leg and match the number. Place the top leg bolt through the metal corner bracket (note – if you have an 

adjustable leg section, it may be necessary to raise the leg section to install the leg). Attach washer and nut 

and tighten this bolt using the supplied wrench or your own ½” socket wrench. Install one leg only.

STEP 3   

Place the shelf upside down on top of the table top. Lift the corner of the shelf and place the bottom leg bolt 

through the metal corner bracket of the shelf. Place a flat washer and nut on the bolt and hand tighten only.

5

Содержание Clinician Adjustable Flat Top





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды