DIRECTIONS FOR USE
DIRECTIONS FOR USE
DIRECTIONS FOR USE
10
The O
AKWORKS
®
Fluoroscopy Table offers a variety of positioning capabilities for
diagnostic x-ray imaging and imaging during therapeutic procedures. Although
it was designed principally for use during pain management x-ray diagnostic
and therapeutic procedures, it may also be used for other diagnostic proce-
dures involving x-ray imaging provided the instructions in this manual are
observed.
Should the use of this device create a circumstance under which the
patient could be over-exposed to the x-ray being used, discontinue use
immediately and determine an alternative radiology table or alternative x-ray
generating source to use.
ADJUSTING HEIGHT OF THE TABLE (CFPM100 & 400):
The CFPM100 & CFPM400 come complete with one foot control.
Operate the controls as shown below to raise or lower the height of the table.
Foot Control - IP68 approved:
Used only to change height of table
IP 68 Enclosures - IP rated as “dust tight” and protected against complete, continuous submersion in water.
UP
DOWN
When operating the table’s controls, be sure to observe all cautions and warnings.
