manualshive.com logo in svg
background image

17

16

OAKTON “Singles” calibration solution pouches  

20/box.

±0.01 pH accuracy at 25°C. Shpg wt 1.1 lb (454 g) per box.

WD-35653-00 Deionized rinse water solution pouches, 

WD-35653-01 pH 4.01 “Singles” buffer solution pouches

WD-35653-02 pH 7.00 “Singles” buffer solution pouches

WD-35653-03 pH 10.00 “Singles” buffer solution pouches

WD-35653-04 Assortment pack, 

5 ea. deionized water, pH 4.01, pH 7.00, and pH

10.00 solution pouches.

Consult your OAKTON

®

Distributor for a complete selection of pH and ORP elec-

trodes, solutions and accessories. Ask for bulletin Accessories A1.

NOTE:  Remember to check the temperature calibration when replacing the ATC
probe.  See section 4.2, "Temperature calibration" (page 9).

10. Warranty

OAKTON warrants this meter to be free from significant deviations in material and
workmanship for a period of one year from date of purchase. OAKTON warrants
this probe to be free from significant deviations in material and workmanship for a
period of six months from date of purchase. If repair or adjustment is necessary and 
has not been the result of abuse or misuse within the warrantied time period, please
return—freight prepaid—and correction will be made without charge. OAKTON
alone will determine if the product problem is due to deviations or customer misuse.

Out-of-warranty products will be repaired on a charge basis.

11. Return of items

Authorization must be obtained from your OAKTON distributor before returning
items for any reason. When applying for authorization, please include data regard-
ing the reason the items are to be returned. For your protection, items must be care-
fully packed to prevent damage in shipment and insured against possible damage or
loss. We will not be responsible for damage resulting from careless or insufficient
packing. A restocking charge will be made on all unauthorized returns.

NOTE

: We reserve the right to make improvements in design, construction, and

appearance of products without notice.

Содержание pH 5+











Отзывы: