TO MEASURE SPLIT TIME
Split time (intermediate time) is a measure of the current time total that is
taken without stopping the timing circuit. The hands pause so you can read
them, then catch up to the ongoing time total.
Start timing
Press button “A”.
PAUSE HANDS BUT CONTINUE TIMING
Press button “B” to pause the chronograph hands and read the current time total.
Although the hands are no longer moving, time is still being measured.
Press button “B” again to move the hands to the currently running time total.
Continue to use button “B” to pause the hands when desired. Time continues to
be measured.
STOP TIMING AND DISPLAY THE FINAL TIME TOTAL
While the hands are moving, press button “A” to fully stop timing and display the
total time measured.
RESET
While timing is stopped, press button “B”.
TO MEASURE ADDED TIME
Added time (cumulative time) is a measure of how much time has passed
without including pauses. This feature lets you exclude the time intervals
you do not want to measure.
START TIMING
Press button “A”.
STOP TIMING TEMPORARILY
Press button “A” to stop timing temporarily.
Press button “A” again to restart timing.
Continue to use button “A” to add
additional time intervals to the total
measure of time. When using button “A”
only, the time that occurs while the
chronograph hands are not moving IS NOT
ADDED to the total measure of time. See
below if you wish to include this “split
time” in the total measure of time.
RESET
While timing is stopped, press button “B”.
CRANKCASE INSTRUCTION MANUAL 07
06 CRANKCASE INSTRUCTION MANUAL
Button A
Button B
Crankcase Manual_ENG 10/1/07 11:56 AM Page 6
