Oakley 5U, Руководство строителя

Страница: 13 / 33

ASV Pot & Switch Board issue 1.1 Parts List
Note that this is for issue 1.1 Pot Boards only. Check which issue board you have before
starting to populate your board.
Resistors
1% 0.25W metal film types are recommended for most values. R1, R2, R3 and R4 should be high
precision 0.1% or better.
220R R27
2K2 R5, R29
22K R21, R22, R23, R24, R14, R26, R28
22K/0.1% R1, R2, R3, R4
47K R9, R10, R15, R17
62K R12, R13, R20
100K R8, R16, R18
180K R6
470K R7, R11, R19, R25
Capacitors
100nF axial multi-layer ceramic C1, C7, C8, C5, C15, C3, C12, C16, C11
33pF C0G ceramic 2.5mm C6, C9
100pF C0G ceramic 2.5mm C2, C14
2u2, 50V polyester * C10, C17, C18, C19
2u2, 63V electrolytic ** C4, C13
* WIMA MKS2B042201F00KSSD are recommended due to their smaller height.
** These should be miniature or low profile types to allow them to fit under the panel. However,
ordinary full height parts can be used if they are laid down flat.
Discrete Semiconductors
1N4148 silicon signal diode D1, D2, D3, D4
BC550 NPN transistor Q1
BC560 PNP transistor Q2
LED 5mm green GATE – solder only when panel is in position
13