1
Introduction
Thank you for choosing the Padma to be a part of your high performance music listening system. Each
Padma is handcrafted, using the very latest, no compromise, cutting edge technology and componentry.
This ensures the best possible sound reproduction currently available and guarantees many years of
listening enjoyment.
We understand that you are eager to begin listening; however, please take a few minutes to read through
this guide for useful information concerning the operation of your new preamplifier. OAD Ultrafidelity
equipment takes a considerable time to run in before it performs at its best. The duration varies, but
under some conditions the sound may continue to improve for over a month. Better and more consistent
performance will be achieved if the system is left switched on for long periods. It is worth remembering
however that equipment left connected to the mains can be damaged by lightning.
After reading this manual, if you have any further questions regarding your preamplifier, contact your
dealer or OAD Ultrafidelity customer service – they will be happy to help you to make the most of your
new component.
Happy Listening!
Warnings
• To prevent fire, or shock hazard, do not expose your Padma to rain or moisture.
• Do not place objects containing water on top of this unit.
• This unit contains voltages which can cause serious injury or death.
• Do not operate with covers removed. Refer servicing to your authorized OAD Ultrafidelity dealer or
service personnel.
• A power cord is shipped with your Padma that meets the required safety standards. It is important for
both safety and performance that the standard cable supplied is not modified.
• A switch at the rear of the Padma must be accessible in case of emergency power disconnect. The
power button on the front touch display panel of this unit, when off, does not disconnect all power
from this unit. This unit is in standby mode when not on. For continued protection against fire hazard,
replace the fuse only with the same type and rating (see page 8 for fuse information).
• Your hi-fi system, including the Padma, can be damaged by lightning and should be turned off and
disconnected from the mains when there is risk of lightning strike.
• We recommend that all connections to the Padma are made with either the mains power cord
disconnected or the rear mains switch left in the ‘0’ (OFF) position. When all connections are made
and checked, move the rear mains switch to ‘1’ (ON) position.
Ventilation
Due to its highly sophisticated numerous power supplies, the Padma will run slightly warm when not in
standby. You must allow for this in installation, by providing for free air circulation around the product.
Never block any ventilation openings. Allow at least 50 mm of clearance around these products for proper
ventilation. Electronics should not be subjected to sources of excessive radiant heat. Excessive heat can
shorten the life of the product.
Packaging
Save all packaging in a dry place away from fire hazard. Your Padma is a precision electronic instrument
and should be properly boxed any time shipment is made. It is very unlikely that you will have to return
your unit to the factory for service, but if that should prove necessary, the original packaging will protect
your Padma from unnecessary damage or delay.
