Stab pod preparation.
The stab pod’s rear is sanded and prepared in our factory to let the elevator wire through.
But the final slot must be finished with a 2mm bit drilling and a little file. Pay attention, the slot mustn’t be extended in
the boom structure, to ensure the boom stiffness in launch constraints.
Rudder installation
For a right-handed pilot, the peg installs at the tip of the left wing. The rudder has an asymmetrical profile, and in the
case of a right handed pilot, the top (domed) surface must face towards the peg. The horn must be glued on the
opposite (flatter) side. For a left-handed pilot, as the rudder is symmetrical, just mirror the installation by putting the peg
on the right wing tip, curved rudder facing right and rudder horn glued on the left side.
