X4 & X5 Install & Operation Manual
500475 v051120
Sterizen
EN
8
Commissioning
1
2
3
5
4
Sit the containers into the
base. Remove the lids and
peel back the safety cap.
Insert the hoses into the
containers ensuring they are
pushed to the bottom.
Fit rear panel back on and
lock.
Remove the rear access cover
located at the rear of the unit
by unlocking the catch and
then lifting up the cover.
NOTE: PLEASE REFER TO PAGE 11 FOR FULL INFORMATION ON BATTERY OPERATION.
For first time use it is required to prime the pump so the sanitiser gel is close to the outlet. To do this,
repeatedly place your hands under the sensor until the unit starts to dispense the sanitiser gel.
The unit is now ready for use.
Insert the provided batteries
into the battery holder. Take
care to ensure all batteries
are inserted with the correct
polarity as shown inside the
battery compartment.
