O2 Xda Flame, Руководство пользователя

Страница: 7 / 36

12 O
2
13 O
2
get ready
Now, you need to do more than
Inserting SIM/USIM card and battery for fi rst time use.
1. Remove the battery cover by gently
pulling the clip downwards and then lift
out the rear cover in the direction shown
below.
2. Unlock the SIM/USIM card holder by
pushing it towards you and lifting it up.
4. Gently press down the SIM/USIM card
holder and lock it by sliding it away from
you as shown below. Make sure the
holder does not bounce back upwards.
7. Slide the cover back into place and push
down until it clicks.
Note: Reverse the process to remove the
battery and SIM/USIM card.
● Universal AC Adapter:
Connect the
battery charger to a suitable main power
socket and plug the charger into the con-
nector of your O
2
Xda Flame.
● USB Cable:
Connect your O
2
Xda Flame
to your PC’s USB port with the bundled
USB cable as shown above.
Charging the battery
The battery is not fully charged when delivered. It takes approximately 4 hours for a new or
depleted battery to be fully charged.
just read. Use your hands, and let’s get your phone ready for use.
3. Insert the SIM/USIM card with the metallic
part facing down and the clipped corner
to the left.
5. Slide the battery into place with the metal
connectors facing down and away from
you. Push down the back edge until it clips
into place.
Before inserting/removing a SIM/USIM
card, please make sure that your O
2
Xda
Flame is powered off and is not connected
to any power supply via USB cable or AC
adapter.
6. Once the battery has been inserted, push
the side facing you down until it clips into
place (
1 ). Slide the clip ( 2 ) on the right
of the battery compartment towards the
battery.