O.Y.L. Technology AX1 LED, Руководство пользователя

Страница: 25 / 42

AX1 LED User Manual Rev 1.0
4.0 PIN CODE EDIT
4.0.1 MASTER USER
Command Information
Step 1: Press [1] [#]

Zone 1 light will be ON to indicate that the
command has been accepted and the users
are in
“Edit User’s PIN”
option.
Step 2: Enter the user number : [1] [#]

User 1 = Master user
Step 3: Press the new PIN : [4 - 6 digits PIN] [#]

Zone light will be ON one by one to
indicate that the PIN has been entered.
Step 4: Repeat the new PIN: [4 - 6 digits PIN] [#]

Zone light will be ON one by one to
indicate that the PIN has been entered.

The keypad will beep twice for valid entry.
Note:
PIN “000000” is not allowed to be used as password.
Master PIN default value: “
111111
”
4.0.2 USER
Command Information
Step 1: Press [1] [#]

Zone 1 light will be ON to indicate that the
command has been accepted and the users
are in
“Edit User’s PIN”
option.
Step 2: Enter the user number : [2 - 7] [#]

User 2 - 7 = Normal user
Step 3: Press the new PIN : [4 - 6 digits PIN] [#]

Zone light will be ON one by one to
indicate that the PIN has been entered.
Step 4: Repeat the new PIN: [4 - 6 digits PIN] [#]

Zone light will be ON one by one to
indicate that the PIN has been entered.

The keypad will beep twice for valid entry.
Step 5: Enter access level : [ Toggle key 1-4] [#]

Press key 1 to key 4 to set user access level.

Key [ 1 ] –Arm and Disarm On (1)/ Off (0)
Key [ 2 ] – Arm (1)/ Disarm (0)
Key [ 3 ] – Bypass Enable (1)/ Disable (0)
Key [
4
] – Open/ Close Report (1)/ Disable (0)
*By pressing Key 1 - 4 will toggle its status to
ON / OFF

The keypad will beep twice for valid entry.
Note:
PIN “000000” is not allowed to be used as password.
After enter the user number, press [ # ]. Press [ 0 ] [ # ] to delete PIN.
The Master user should change the PIN for user 1 to 8 after the installation. Even though the user
PIN is not used, the user should clear the PIN for those users by key with new PIN as “
0
”.
20