CONVERTING YOUR LARGO FIRE PIT TO A DIFFERENT GAS TYPE
To convert your Largo Fire Pit from propane to natural gas or natural gas to propane gas, carefully follow the steps
below:
1.
MAKE SURE THAT THE GAS SUPPLY TO THE LARGO FIRE PIT (AND ANY NEARBY ELECTRICAL
SOURCES/APPLIANCES) ARE SHUT OFF.
2.
Carefully detach the connector hose attached to the orifice holder (Figure # 1) and unscrew the orifice holder
from the burner pipe (Figures #1 and # 2).
3.
Remove the orifice from the holder (Figure # 2 ) and replace it with the proper sized one for your gas
requirement. Propane requires the smaller orifice.
4.
If you are converting to propane (LP) gas, slide the air shutter so that the air intake hole is open (Figure #1). For
natural gas, slide the air shutter so that the air intake hole is closed (Figure #2).
Connector hose
Open air shutter
Orifice holder
Air intake hole open for
LP Gas
Figure 1
Burner
Orifice
Orifice holder
Connector hose
Air shutter closed for
Natural Gas
MANUFACTURER’S USE ONLY
Quality
Check
Date:____________
Orifice # (MAIN)
____________
Model #
____________
Orifice # (OTHER)
____________
Serial #
____________
Leak
Test:
____________ Air
Shutter:
____________
Burn
Test:
____________ Inspector:
____________
Gas Type:
NAT / LP
Figure 2
8