1.4 PAIRING USEE WITH ANT+ SENORS
The USEE can be connected to ANT + sensors without the use of a smartphone.
1. Activate your ANT+ sensors. Please
check your sensor manual on how to
activate it (pairing mode).
Please make sure that all other ANT+
sensors are not active or out of reach!
2. Insert the battery or press
the reset button to re-
activate pairing mode.
3. The USEE will search and pair all available (activated) ANT+
sensors located close to the USEE .
Paired sensors will be automatically connected at any new start
within a few seconds after turning on the USEE.
The USEE is preset for the wheel size of 2100 mm and metric
units. The setting can be changed any time with the o-synce
mobile App.
CR 2032
Battery
30 sec.
7 | 20
o-synce mobile | Manual
