O-Synce NAVI2move, Руководство пользователя

Страница: 13 / 16

12
5 BACKTRACK – Home tracking function
If you start a recording before beginning a tour, the location where you are currently situated will be
saved as your starting point. If you start the backtrack function the navigation arrow will point
directly to this starting point. The direct distance (beeline) in between you and the starting point can
also be displayed. To find back to your starting point, follow the direction the arrow shows you. The
arrow will always guide you in the direct way to your home destination.
For starting the backtrack function, enter the menu and select
"Back home" .
In the following list you may choose one out of the latest four staring points. The upper starting point
is always the one which has been saved lately.
6 POI (Point of Interest) – Save and recall landmarks
On your trip you can recall saved data about important sites, interesting restaurants, e.g.
Saving
Switch into navigation mode and hold the left button for 2 seconds ( remote control: middle button) A
pop-up menu with a choice of icons will appear. With the right button (remote control: lower button)
select an icon which matches to your POI and confirm by pressing the left button ( remote control:
middle button). As a confirmation the compass circle will start to blink.
Recalling
As in the backtrack function, the navigation arrow points straightaway into the direction of your POI.
Enter the menu, select
"navigation" -> "POI" and choose the POI you want to be guided to.
7 DELETING DATA
Through the submenu "clear data" which is located in the main menu you can delete the following
data:
a. POI
b. Home Track (Deletes start point of tracks and all recorded tracks)
c. Route Plan
d. Totals
Please remind that all data of its group will be deleted. By choosing
"totals" all data including time ,
total kilometres , altitude difference uphill and downhill will be deleted.