Open the SAS sw on your computer and press the button for ‘connection to the device’.
If you are using the watch the first time you have to confirm the connection by pressing
B
on the watch. After the connection, the recorded data will be automatically transmitted.
NOTE:
If you are having problems uploading data, you may need to enable computer
pairing.
9 APPENDIX
Technical features
MIXpro
Watch size:
58 mm × 42 mm × 20 mm
Wrist band size:
204 mm × 28 mm × 3 mm
Weight:
44 g
LCD-Display:
23,75 mm × 18,25 mm, with backlight
Water resistance:
to 30 m
NOTE: don’t press any button under water!
Computer interface:
Wireless, automatic ANT+Sport receiver
Battery type:
User-replaceable CR2032 (3 volts)
Battery life:
12 months, depending on usage
Operating temperature range:
5° F to 158° F (-15° C to 70° C)
Radio frequency/protocol:
2.4GHz/Dynastream ANT+Sport wireless communications
protocol
Heart2feel (heart rate sensor and belt)
Physical size:
65 x 38 x 11 mm
Weight:
25 g
Water Resistance:
10 m
Transmission range:
approximately 3 m (9.8 ft)
Battery:
User-replaceable CR2032 (3 volts)
Battery Life:
approximately 3 years (1 hour per day)
BATTERY
All products (also the accessories) contain a user replaceable CR2032 battery. The battery
will last approximately 12 months for the watch, 200 hours for the MAXrun, 18 months for
the heart2feel belt and the MACRO 2S sensors (typical use).
When the battery is low, the
LoBATT
warning blinks on the MIXpro screen in Time mode.
CAUTION:
Replacing the battery resets the MIXpro software and restores the factory
_20
