CARBURETOR CONTROLS
With a fixed-wing model, power failure is rarely a
serious threat to the safety of the aircraft since it can
usually glide down to a safe landing. In a helicopter,
on the other hand, it is vitally imporant that the engine
keeps running and that there is a quick and reliable
response to the throttle in order to ensure safe ascent
and descent of the model.
The High-Speed (Main) Needle Valve
When set to produce maximum power at full
throttle, this establishes the basic fuel/air mixture
strength. This is then maintained by the carburetor's
automatic mixture control system to cover the
engine's requirements at reduced throttle settings.
The Idle Mixture Control Screw
This provides the means of manually adjusting the
60B's mixture control valve. By setting the Mixture
Control Screw for the best idling performance, the
mixture control valve automatically ensures that fuel is
accurately metered to maintain the correct mixture
strength as the throttle is opened.
FUEL
Select, by practical tests, the most suitable fuel from
among the best quality fuels available in your country
for helicopter use. For the best throttle response, a
fuel containing 10% to 30% nitromethane is
preferable. Lubricants may be either castor-oil or a
suitable synthetic oil (or . a blend of both) provided
that they are always of top quality. For consistent
performance and long engine life, it is essential to use
fuel containing AT LEAST 18% lubricant by volume.
Some fuels containing coloring additives tend to
deterriorate and may adversely affect running
qualities. If in doubt compare to a fuel known to be
good.
Model engine fuel is poisonous. Do not allow
it to come into contact with the eyes or
mouth. Always store it in a clearly marked
container and out of the reach of children.
Model engine fuel is also highly flammable.
Keep it away from open flame, excessive
heat, sources of sparks, or anything else
which might ignite it. Do not smoke, or allow
anyone else to smoke, near to it.
Reminder!
Three adjustable mixture controls are fitted to the Tyoe
60B. They are as follows.
A
B
12
