SIR15H-755AI_Rev04292008
Model SIR15H-755AI
SIR15H-755AIP
TV System
NTSC PAL
Image Sensor
1/3” Sony Super HAD CCD
DSP
Sony HQ-1
Total Pixels
811(H) × 508(V)
795(H) × 596(V)
Video Output
1.0Vp-p composite / 75 Ohms
(BNC connector)
Resolution
550 TV Lines
Minimum
Illumination
0 Lux IR LED “on” @ 2.0 Lux
Controlled by a CDS sensor
IR Working
Distance
60~100ft / 18~30m
IR LED
15 High Power IR LED
Water
Resistance
IP67
S/N Ratio
More than 50dB (AGC OFF)
Synchronizing
System
Internal
B.L.C
ON/OFF (Switchable)
A.G.C
ON/OFF (Switchable)
Flickerless
ON/OFF (Switchable)
Auto White
Balance
AWB
Lens/Angle of
View
2.9mm~10.0mm / F1.2
Aspherical Auto Iris Lens
94.6°~28.8°
Power Supply
12V DC
Lead Free
Yes
Power
Consumption
235mA @ IR “off” / 355mA @ IR “on”
2.9W @ IR “off” / 4.3W @ IR “on”
Operation
Temperature
-10°C ~ +50°C
Storage
Temperature
-20°C ~ +60°C
Storage
Humidity
Maximum: RH85%
Dimensions
185(L) x 73(Ø) mm w/o Bracket
Weight
520g
*Specifications are subject to change without notice
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this
may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling
could damage the camera.
3. Requires a proper operating environment
This camera is designed for outdoor or indoor use. The allowable
temperature range for operation of this camera is between
-10
°
C ~ 50
°
C and the allowable humidity is 85%RH maximum.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned
before lens installation or whenever the lens is changed. Cleaning
should be done by using a chamois, a very fine soft cloth, lens
tissue, or cotton tipped applicator and ethanol to carefully
remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range.
(Camera must meet the specifications). Camera must be
connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may
touch dangerous voltage points of short out parts that could
result in a fire or electric shock. Never spill any kind of liquid on
the video product.
7. Servicing
Do not attempt to service this video product by yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all service to qualified servicing
personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service
to qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been dropped or the cabinet has
been damaged.
d. When the video product exhibits a distinct change in
performance.
O.K.I.USA Products are covered under warranty for one year from
the date of purchase. The warranty will automatically be voided if
any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm
any information regarding when and where the product was
purchased. We have no other way to verify the purchase record
without the serial number on the camera sticker; therefore, it
should not be removed.
2.
Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner
not described in this manual, the warranty will be voided
immediately. It is the customer’s responsibility to keep the
camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered
with. Cutting or modifying of the cables will result in termination
of the warranty.
CAUTION
WARRANTY
SPECIFICATIONS
