Cod. 9203300
Pag.2
Precautions
•
Do not use this appliance for a different function of hand dryer.
•
Check that your electrical voltage and frequency correspond to those marked on the fan
rating label.
•
Installation must be carried out by qualified personnel according to manufacturer’s
instructions. Incorrect installation can cause damage to people, animals or properties for
which the manufacturer cannot be considered liable.
•
Do not use the product in the presence of explosive or flammable or corrosive vapors.
•
Do not install the device in a place where it is exposed to atmospheric agents
.
•
Do not modify the appliance.
•
This appliance can be used by children aged from 8 years and above and persons with
reduced physical sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
•
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
•
Lasciare sgombra la parte inferiore dell’apparecchio, non posizionare nulla sotto di esso.
•
Do not obstruct the air outlet nozzles, do not insert anything inside the seat drying
.
•
Install the device so that it is inaccessible to those who are using the bath or shower
.
•
In case of failure and / or malfunction disconnect the appliance from the power supply
and contact the manufacturer or dealer
.
•
At the end of cycle dispose of the equipment by handing it to a collection center
(ref.
UE
2002/96 Directive).
Dati tecnici
220-240Vac 50/60Hz – 1200W – 6(A) – IPX4 – 360Km/h – 100m/s – Classe I
Technical data
220-240Vac 50/60Hz – 1200W – 6(A) – IPX4 – 360Km/h – 100m/s – Class I
Installazione
Verificare che l’impianto elettrico e la presa di corrente siano compatibili con i dati di targa
dell’apparecchio.
Installation
Check that electrical system and power socket are compatible with the data on the label.
1
2
3
4
1) Fissare al muro la staffa di fissaggio ad un’altezza da terra di circa 350mm dal bordo
inferiore tramite le viti ed i tasselli, inserendo i distanziali antivibrazione tra muro e staffa.
2) Rimuovere il filtro e la vaschetta di raccolta dell’acqua situati nella parte inferiore
dell’asciugamani.
