NZXT khaos, Руководство пользователя

Страница: 11 / 19

NZXT. 9
USB, Audio ports, E-SATA, Reset, and Power buttons
1. Connect the reset switch (labeled RESET SW) by
connecting to your motherboard RESET connector. Make
sure you always attach the white wire to ground.
(Purple/White +/-)
2. Connect the power switch pin (labeled POWER SW) to the
PWR connector on the motherboard. (Yellow/White +/-)
3. Connect the HDD LED (labeled H.D.D LED) to the
appropriate headers on your motherboard. The HDD LED
located on the top panel should flash green when there is
activity in the hard drive. (Green/White, +/-)
4. Connect the power LED (labeled PLED+, PLED-) to the
appropriate headers on your motherboard. The Power LED
located on the top panel should power on blue. (Blue/White,
+/-)
All White and Black Pin Connectors correspond to ground.
USB Installation
1. The USB is located of the top on your front panel.
2. Refer to your motherboard manual and match the labels on
the USB port connectors with your motherboard in order to
install.