NZXT Hush, Руководство пользователя

Страница: 7 / 13

NZXT. 5
HDD LED, Speaker, Power, Reset, and Fan power
installation
Please refer first to your motherboard manual to find where your
power switch and reset pins are located. The colors following each
instruction designate the color of the wires.
1. Connect the reset switch (labeled RESET SW) by
connecting to your motherboard RESET connector. Make
sure you always attach the white wire to ground. The reset
switch is located behind the front panel. (Purple/White +/-)
2. Connect the power switch pin (labeled POWER SW) to the
PWR connector on the motherboard. The power switch is on
the front panel. (Yellow/White +/-)
The front panel Power, Reset, Power LED, and HDD LED locations
3. Connect the HDD LED (labeled H.D.D LED) to the
appropriate headers on your motherboard. The HDD LED
located on the front panel should flash green when there is
activity in the hard drive. (Green/White, +/-)
4. Connect the power LED (labeled POWER LED) to the
appropriate headers on your motherboard. The Power LED
located on the front panel should power on blue.
(Blue/White, +/-)
5. Connect the two four pin Molex connector to the power
supply in order to power the two 120mm fans