NZXT Hades, Руководство пользователя

Страница: 7 / 15

NZXT. 5
1. Match the motherboard form factor ( ATX, M-ATX, ITX ) with the
holes on the motherboard tray
2. Secure the standoffs onto the holes which match your
motherboard
3. Lay the motherboard onto the standoffs and then continue to
secure the motherboard with the screws provided.
LED, Power and Reset Installation
Please refer first to your motherboard manual to locate where the power switch
and reset pins are located. The power switch is located on the door while the
reset button is located behind the door. The colors following each instruction
designate the color of the wires.
.
USB, Audio ports, and E-SATA
1. Connect the reset switch (labeled RESET SW) by connecting to your
motherboard RESET connector. Make sure you always attach the white
wire to ground. (Red/Black +/-)
2. Connect the power switch pin (labeled POWER SW) to the PWR
connector on the motherboard. (Brown/Black +/-)
3. Connect the HDD LED (labeled H.D.D LED) to the appropriate headers
on your motherboard. The HDD LED located on the front panel should
flash Blue when there is activity in the hard drive. (Blue/Black, +/-)
4. Connect the POWER LED(lP LED/-P LED) to the appropriate
headers on your motherboard.(Green/Black,+/-)
All Black Pin Connectors correspond to ground.