-5-
function is activated, the network will alert you and the mobile phone screen will display the incoming
call number if others are calling you while you are already in a conversation.
Call barring:
The call barring function enables you to bar calls as needed. When setting this function,
you need to use a network barring code, which can be obtained from the network operator. If the code is
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
Hide ID:
You can select hide ID, display own ID and or display ID by network.
Others:
You can set IP prefix, call time minute reminder, auto redial, reply SMS after reject and auto
record voice call through this function.
Phone Settings
Date & Time
: set the date format, the time format, and detail time of the location.
Note:
If you remove the battery from the mobile phone or if the battery energy was exhausted a long time ago,
you may need to reset the date and time when re-inserting the battery or powering
on the mobile phone after
recharging.
Language settings:
Select the display language and writing language for the mobile phone.
Shortcut settings
:
Select preferred function as shortcut on screen direction key as needed.
Auto power on/off:
Set the time when the mobile phone will be automatically powered on or off.
Alert: Before entering an area where the use of mobile phones is forbidden, make sure that the scheduled