New York Standard Watch Company
.
www.newyorkstandardwatch.com
NYSW
Instruction Manual
-
Atomic (Radio Controlled) 3 Hands watch for USA and Europe.
IM code: M55A
Table of World Time Zone against Second-Hand Position
UTC
Time Zone
Second-Hand Position
0 London
---------------------------------
Second-hand point to (12 o’clock)
-1
Cape
Verde
00:00:59
-2
Mid-Atlantic
00:00:58
-3
Greenland
00:00:57
-4
Santiago
00:00:56
-5 USA(Eastern)
-------------------------
Second-hand point to (11 o’clock)
-6 USA(Central)
-------------------------
Second-hand point to (10 o’clock)
-7 USA(Mountain)
----------------------
Second-hand point to (8 o’clock)
-8 USA(Pacifi c)
--------------------------
Second-hand point to (7 o’clock)
-9
Alaska
00:00:29
-10
Hawaii
00:00:28
-11
Samoa
00:00:27
-12
Kwajalein 00:00:26
UTC
Time Zone
Second Hand Position
0
London
---------------------------------
Second-hand point to (12 o’clock)
+1
Berlin, Paris, Madrid
---------------
Second-hand point to (1 o’clock)
+2
Istanbul
00:00:06
+3
Moscow
00:00:07
+4
Abu
Dhabi
00:00:08
+5
Islamabad 00:00:09
+6
Dhaka
00:00:10
+7
Bangkok 00:00:11
+8
Beijing,
HK
00:00:12
+9 Tokyo,
Seoul
---------------------------
Second-hand point to (4 o’clock)
+10
Sydney
00:00:21
+11
Guam
00:00:22
+12
New
Zealand
00:00:23
Manual Signal Reception
Your Atomic Watch is programmed to receive the local Atomic clock signal at 3AM every day automatically. If you want to manually
search for the radio signal please follow the instructions below:
1. Press and holding S1 for about 6 seconds until the second-hand stops. This shows that the watch is in the “Manual Signal Recep-
tion Mode”.
2. As your watch is attempting to pick up the radio signal it will take about 4 to 20 minutes to complete this process.
3. After receiving the radio signal the second hand will run fast. After completion, the current time will be displayed when the sec-
ond hand stops running. DO NOT push any button before the watch runs regularly.
The signal is always better during the nighttime but not during the daytime. So if your watch cannot receive the signal during the
daytime, just leave it nearby a window with facedown position and check it again the next morning.
