- 4 -
- 4 -
SETUP
RECEIVER SETUP
1. Connect the included power adapter to the POWER INPUT on the back of the
receiver unit.
2. Plug in a set of suitable earphones or speakers (not included) to the AUDIO
OUTPUT. The correct wire connection size is 3.5mm.
3. Press the POWER button on the receiver unit to turn on the receiver.
4. The receiving indicator will be RED while waiting for a signal from the
transmitter unit.
TRANSMITTER SETUP
1. Be sure that your iPod/iPhone/iPad is turned off during the system setup.
2. Connect the transmitter to your iPod/iPhone/iPad.
3. Once you begin playing your iPod/iPhone/iPad, the power indicator on the
transmitter unit will light up.
1. Press the POWER button on the receiver unit.
2. Play your iPod/iPhone/iPad and the power indicator on the transmitter unit
will light up.
3. The receiving indicator will be BLUE once the units are paired successfully. (The
available range of the units is 100 feet).
4. Adjust the volume to a comfortable level from your iPod/iPhone/iPad or
your speakers.
CHANGING THE RF CHANNEL
•
To improve the sound quality, you can change the operating channel to one of
8 channels. Press and hold the PAIRING button on the back of the transmitter
to select a different channel.
•
If the unit does not pair automatically, press and hold the PAIRING button for
3 seconds to enter the PAIRING mode. The unit should pair automatically.
OPERATION