Installation and Operating Instructions
Plastic Fluted Grab Rail 300mm
PFGB 12/XX
Plastic Fluted Grab Rail 450mm
PFGB 18/XX
Plastic Fluted Grab Rail 600mm
PFGB 24/XX
Plastic Fluted Grab Rail 900mm
PFGB 36/XX
Installation and Operating Instructions
Plastic fluted grab rail
• Due to manufacturing tolerances we do not
recommend pre-drilling fixing holes before physically
receiving this product.
• On receiving delivery of this product, a thorough
check must be carried out and any defects
immediately reported. The product must be stored in
a dry place and not stacked under other equipment.
• The wall on which the rail is installed must be flat
and capable of taking the load.
• Installation must be carried out by a qualified
tradesman using suitable fixings for the wall
substrate.
• Improper installation / use can cause accidents and
injuries.
• Do not use countersunk fixings.
• Never alter the fixing holes as this could affect the
strength and integrity of the product.
• Do not over-tighten fixings.
• This rail has been tested with a static load of 160kg
giving a max rated load of 107kg
• After installation a functional test must be carried
out prior to use.
• These instructions should be retained by the user of
the product for its whole life.
• This rail should not be subjected to impact.
• This rail is designed to offer support to the user and
should not be used in a way that would apply the
users’ full weight to the rail.
• Do not use the grab rail for any purpose other than
that for which it was designed.
Warnings:
Congratulations on the purchase of your grab rail. This grab rail has been designed for general domestic
indoor use to give users extra support while moving from one position to another. It provides support
and assists with the independent standing and sitting of persons.
Available colours:
WHITE (WH), ELECTRIC BLUE (EB), DARK BLUE (DB), YELLOW (YE), RED (RD)
BLACK (BL), GREEN (GR), BROWN (BR), GREY (GR)
Rev 01
Round flange steel grab rail,
35mm diameter tube
Congratulations on the purchase of your grab rail. This grab rail has been designed to provide
users with extra support while moving from one position to another and assists with the
independent standing/sitting of persons.
Round flange steel grab rail, 305mm
GR-12/35/XX
Round flange steel grab rail, 455mm
GR-18/35/XX
Round flange steel grab rail, 610mm
GR-24/35/XX
Round flange steel grab rail, 750mm
GR-30/35/XX
Round flange steel grab rail, 915mm
GR-36/35/XX
• Due to manufacturing tolerances we do not
recommend pre-drilling fixing holes before physically
receiving this product.
• On receiving delivery of this product, a thorough
check must be carried out and any defects
immediately reported. The product must be stored in
a dry place and not stacked under other equipment.
• The wall on which the rail is installed must be flat
and capable of taking the load. An uneven substrate
surface or angle may cause anti-ligature design issues.
• Installation must be carried out by a qualified
tradesman using suitable fixings for the wall
substrate.
• Improper installation / use can cause accidents and
injuries.
• Do not over-tighten fixings
• The Max Rated Load of is 150kg (24 stone).
• After installation a functional test must be carried out
prior to use.
• These instructions should be retained by the user of
the product for its whole life time.
• Never alter the fixing holes as this could affect the
strength and integrity of the product.
• This product should not be subjected to impact.
• This product is designed to offer support to the user
and should not be used in a way that would apply
the users’ full weight to the rail.
• Do not use the grab rail for any purpose other than
that for which it was designed.
• If in doubt, carry out your own risk assessment
per installation / user to ensure risk(s) is/are at an
acceptable level.
Warnings:
Colours: White (WH), Dark Blue (DB), Grey (GY), Dark Grey (DG)
Rev PI_GR_XX_35_00
