STEP 4: TEST THE SENSOR
Test the Sensor from the desired location before
permanently installing it by flipping it forward as
shown above, this is the same action as the garage
door opening.
Check that the Sensor is reporting a Closed or
Open message from both orientations.
STEP 5: INSTALL THE SENSOR HOUSING
Using the methods shown below, install the Garage Door Sensor
bottom housing on a clean surface.
OPTION 1: 2-SIDED TAPE
OPTION 2: SCREWS
Notes:
Installation on metal surfaces can reduce transmission range.
Ensure that the device is installed in a dry location away from
water, moisture and rain.
STEP 6: INSTALL THE SENSOR
Once you have installed the bottom
housing and confirmed the device is
communicating, insert the sensor top
housing as shown above
PRODUCT FUNCTION AND LED INDICATORS
BUTTON
LED
ACTION
LED
DESCRIPTION
2 TIMES
NETWORK STATUS
JOINED
NOT JOINED
RE-JOIN IN PROCESS
4 TIMES
NETWORK JOIN
SEARCHING FOR NETWORK
DEVICE BEING CONFIGURED
DEVICE JOINED
DEVICE FAILED TO JOIN
8 TIMES
FORCED RE-JOIN
RE-JOIN, SEARCHING FOR PARENT
10 TIMES
NETWORK LEAVE
LEAVE (IF JOINED) AND
AND DEFAULT
DEFAULTS RESTORED
NO ACTION
WRONG BUTTON PRESS
DEVICE BUSY
POWER UP
Button
LED
