background image

Freedom Designs, Inc.

Freedom Designs, Inc.

4

NXT

Generation NEXT

TM

W

W

A

A

R

R
N

N

II

N

N

G

G

!

!

Environmental Conditions

Use extra care if you must ride your chair on a wet or slick surface. Ask for help, 
if you are in doubt.
Contact with water or excess moisture may cause your chair to rust or corrode. 
This could cause your chair to fail.
 

a.  Do not use your chair in a shower, pool or other body of water. The  

 

  chair tubing and parts are not watertight and may rust or corrode from   

  the 

inside.

 

b.  Avoid excess moisture, (for example, do not leave your chair in a damp

  

  bathroom while taking a shower).

 

c.  Dry your chair as soon as you can if it gets wet or if you use water to  

  clean 

it.

Terrain

1.  Your chair is designed for use on firm, even surfaces such as concrete,  
 

asphalt, and indoor 

fl

 oors and carpeting.

2.  Do not operate your chair in sand, loose soil, or over rough terrain. This may 
 

damage wheels or axles or loosen fasteners of your chair.

Street Use

1.  In most states, wheelchairs are not legal for use on public roads. Be alert to  
 

the danger of motor vehicles on roads or in parking lots.

2.  At night, or when lighting is poor, use re

fl

 ective tape on your chair and clothing.

3.  Due to your low position, it may be hard for drivers to see you. Make eye  
 

contact with drivers before you go forward. When in doubt, yield until you  

 

are sure it is safe.

Motor Vehicle Safety

As identi

fi

 ed on the front cover of this user manual, identify whether your chair 

has been manufactured with the Transport Option installed.

If your chair is not equipped with the Transport Option:

The 

NXT

 wheelchairs do not meet federal standards for motor vehicle seating.

1.

 NEVER

 let anyone sit in this chair while in a moving vehicle.

 

a.   

ALWAYS

 move the rider to an approved vehicle seat.

 b. 

 

 ALWAYS

 secure the rider with proper motor vehicle restraints.

2.  In an accident or sudden stop, the rider may be thrown from the chair. Wheelchair  
 

hip belts will not prevent this and further injury may result from the belts or straps.

3. 

NEVER

 transport this chair in the front seat of a vehicle. It may shift and  

 interfere 

with the driver. 

3.

 ALWAYS

 secure this chair so that it can not roll or shift.

4. Do not

 

use any chair that has been involved in a motor vehicle accident.

If your chair is equipped with the Transport Option, see the Transport Option 
Warnings.

General Warnings

!

!

If you fail to heed these warnings, damage to your chair, a fall, tip-over, or 
loss of control may occur and cause severe injury to the rider or others.

Содержание Folding









































Отзывы: