WPR1500-BUCK MP Receiver V2.1 Reference Design User’s Guide, Rev. 0, 09/2016
20
NXP Semiconductors
Getting Started
Figure 28. Build the project successfully
3. Select
Debug Configurations
to select debugger setting. Two supported debugger settings are
already configured in the project.
Figure 29. Flash loader configurations
When using the J-Link as the debugger, select
WPR1500_REF_FLASH_Segger Jlink_Trace
.
When using the P&E Multilink as the debugger, select
WPR1500_REF_FLASH_PnE
U-MultiLink.
If you want to change some parameters, click the
Edit
button in the Target setting
subpage. The configuration interface is shown as follows.
