Table 3 Low power mode configurations
Configurations
Default value
Location
Description
LOW_POWER_MODE_ENABLE FALSE
appcfg.h
Enables or disables the function.
Set TRUE to enable it. Set FALSE
to disable it.
8.2.3 Debug console
Debug console is supported. The following configuration is used to enable or disable it.
Table 4 Debug console configurations
Configurations
Default value
Location
Description
DEBUG_CONSOLE_SUPPORTED FALSE
appcfg.h
Enables or disables the function.
Set TRUE to enable it. Set FALSE
to disable it.
For WCT1011A/WCT1013A digital buck-boost platform, only one SCI port is available. This port is
default used for FreeMASTER. If debug console is used, disable FreeMASTER or change FreeMASTER
communication interface to JTAG. The configurations are described in Chapter 6.
8.2.4 Bootloader
Bootloader is supported. The following configuration is used to enable or disable it.
Table 5 Bootloader configurations
Configurations
Default value
Location
Description
BOOTLOADER_USED
FALSE
appcfg.h
Enables or disables the function. Set
TRUE to enable it. Set FALSE to
disable it.
If bootloader is used, download the bootloader project to the board. Then change BOOTLOADER_USED
to TRUE, rebuild application project, and download application .S file by bootloader.
8.2.5 DCDC control type
NXP provides two DCDC control types: digital buck-boost and analog buck-boost. The default one is
digital buck-boost. The following configuration is used to switch the DCDC control type.
Table 6 DCDC control type configurations
Configurations
Default value
Location
Description
DIGITAL_BUCKBOOST
TRUE
appcfg.h
Switch DCDC control type. Set TRUE to
enable digital buck-boost. Set FALSE to
enable analog buck-boost.
8.3 Protection mechanisms
The following table lists the protections that can be implemented.
WCT1011A/WCT1013A Automotive MP-A9 Wireless Charging Application User’s Guide, Rev. 0, 10/2017
48
NXP Semiconductors
