NXP Semiconductors UM11579, Руководство пользователя

Страница: 19 / 41

NXP Semiconductors
UM11579
PCA9957HN-ARD evaluation board
1. Insert the PCA9957HN-ARD onto the IMX8MMINI-IARD interposer board Arduino
connectors (located on the top side).
2. Attach IMX8MMINI-IARD connector J1 (located on the bottom of the board) into
J1003 expansion board located on the top side of i.MX 8M Mini LPDDR4 EVK (see
Figure 8 ).
3. Power-up the EVK board using an USB Type C cable attached to Port 2.
4. Connect the EVK to the PC using a USB Micro-B cable attached to J901 debug port.
5. Place SW101 in the ON position to power-up the boards.
6. Install the MIMXRT1050 target firmware (download the
EVK_Firmware_And_GUI_Install_Guide_For_Arduino_Boards.pdf instruction file
here ).
7. Install the GUI application on the PC (see the instruction file referenced in the above
step).
8. Open the GUI application to operate the device from the PC. For details regarding
GUI operation, see Section 8 "GUI Description" .
Figure 9. PCA9957HN-ARD daughter board / i.MX 8M Mini LPDDR4 EVK board operation
UM11579 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1 — 25 February 2021
19 / 41