NXP Semiconductors
UM11055
NXP USB PD shield board user manual
UM11055
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
Rev. 1.0 — 9 February 2018
3 / 12
1 Introduction
The main purpose of this user’s manual is to illustrate USB-PD operation for a Type C
port using PTN5110 PD PHY and KL27 PD controller.
PTN5110 is a 1-port TCPC compliant USB Power Delivery (PD) PHY IC that implements
Type-C Configuration channel interface and USB PD Physical layer functions to a Type-
C Port Manager that handles PD Policy management. It complies with USB PD, Type-C
and TCPC specifications and relevant ECNs/ECRs. This IC is targeted primarily for use
in system platforms.
PTN5110 is a USB PD TCPC PHY IC, in HX2QFN16 2.6 mm x 2.6 mm x 0.35 mm, 0.4
mm pitch package.
The demo kit is intended to demonstrate the power, USB data delivery through single
USB Type-C cable between a shield board mounted on a KL27Z FRDM Board and any
USB PD capable device or power adaptor. It also has the power swap, high/low power
request capability between the shield board and connected PD Source or Sink.
This document describes the user manual of NXP USB PD Shield board,
•
Overall PCB connectors, jumpers, and power supplies.
•
Setup Information for USB-PD operation
•
Setup Information for USB TypeC operation using simple CC Logic
1.1 Purposes
•
For customers to evaluate NXP USB Type-C Power Delivery PHY and protocol IC
PTN5110 and DP Alternate Mode features through single USB Type-C connection.
–
Power swap between the shield board and any connected SRC/SNK.
–
Power delivery between the Shield and any connected SRC.
–
Power delivery selection between 5V or 9V.
–
CC logic and PD control through Kinetis KL27Z residing on the Freedom board.
–
Transfer power, data through USB Type-C cable between the shield board and any
connected device or power adaptor.