NXP Semiconductors
UM10815
NXP Smartphone Quick-Jack Solution quick start guide
UM10815
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2014. All rights reserved.
User manual
Rev. 1 — 19 May 2014
5 of 12
2. NXP Quick-Jack Quick Start Guide
This Quick Start Guide explains how to get up and running with the Quick-Jack solution.
2.1 Hardware requirements
The Quick-Jack solution requires the NXP Quick-Jack board (OM13069) and a
compatible smartphone.
Quick-Jack has been tested and verified to work on the following smartphones:
•
iOS: iPhone 4, iPhone 4S, iPhone 5, iPhone 5S
•
Android: Samsung Galaxy S3.
Other phones are not currently guaranteed to work.
2.2 Software requirements
The Quick-Jack board ships pre-programmed. The latest version of the firmware,
including the source code, can be found on
http://www.lpcware.com/quick-jack
.
The smartphone example app can be downloaded from the
App Store
(iOS). The
Android App (APK) and source code can be downloaded from
http://www.lpcware.com/quick-jack
.
2.3 Getting up and running
To get up and running with Quick-Jack, follow these steps:
1. Download and install the app. The app can be downloaded from the
App Store
(iOS).
The app can be found in the app-store by searching for ‘NXP Quick-Jack’.
2. Make sure the coin cell battery (size CR1220) is inserted and that the jumpers on the
Quick-Jack board are set to default (
Fig 2
).
Fig 2.
Coin cell battery inserted, jumpers set to default configuration (JP2 on both
positions, JP3 placed on the right position)
3. Insert the Quick-Jack board in the phone’s audio jack. Then, configure the media-
volume/headset-volume on the phone to maximum volume (
Fig 3
).
