NXP Semiconductors TWR-MCF5441X, Краткое руководство пользователя, Страница: 4 / 12

TOWER SYSTEM
Locate the
Elevator Modules
Each elevator module is identifiable
by its four card edge connectors.
Identify the
Elevator Modules
Each elevator module is either Primary
or Secondary. They are identifiable
as follows:
• Primary Elevator:
written on inside top and denoted
by white card edge connectors
• Secondary Elevator:
written on inside bottom
Locate Additional
Modules
Gather any additional modules that
will be used to assemble your desired
Tower System configuration.
Identify the Primary and
Secondary Card Edges
For each module, the words Primary and
Secondary are written along the card
edges. The primary edge is also denoted
by a white stripe.
Plug in Primary
Card Edge
Match the white stripe on the edge of
each module to any available connector
on the Primary Elevator and plug it in.
Attach Secondary
Elevator
With all desired modules connected to
the Primary Elevator, carefully attach the
Secondary Elevator onto to the secondary
card edges of each module.
How to build your Tower
STEP
3
STEP
1
STEP
2
STEP
4
STEP
5
STEP
6