4
Step-by-Step Installation Instructions
Configure
Jumpers
Configure the TWR-IND-IO jumpers to
align with the intended Tower System
controller module. Be aware that not
all controller modules will provide
access to all features available on the
TWR-IND-IO. Refer to the Jumper Table
in this document for reference and
the user manual for additional details
regarding the flexibility of this module.
Ensure
Compatibility
Each interface featured on the
TWR-IND-IO is capable of being
isolated from the Tower System.
To maintain the best compatibility
with additional Tower peripheral
modules it is recommended that any
unused interfaces be isolated.
Assemble Your
Tower System
Assemble your Tower System,
including a Tower System controller
module, the TWR-IND-IO peripheral
module, and the TWR-ELEV elevator
modules. Refer to the assembly instructions
provided with the TWR-ELEV modules for correct
orientation and assembly of boards. NOTE: The
TWR-IND-IO module is intended to be compatible
with the TWR-SER serial module, thus expanding
the number of available interfaces.
Refer to Additional
Materials
Many existing MQX
™
example projects can be
adapted to utilize the respective I/O interfaces on
the TWR-IND-IO by modifying the “user_config.h”
file and recompiling the MQX BSP. Refer to the
TWR-IND-IO user manual and the latest MQX
release notes for details. Refer to the TWR-IND-
IO page on
freescale.com/Tower
for additional
information and example application projects for
select Tower System controller modules.
Quick Start Guide
3
4
2
1
Downloaded from
Downloaded from
Downloaded from
Downloaded from