TRK-MPC5606B
3
Install Software
and Tools
• Run setup.exe from the installation
media. This will install the following
software tools:
CodeWarrior Development Studio v10.5
(Special Edition), RAppID Init tool, RAppID
Boot loader utility, FreeMASTER utility,
CodeWarrior Project Maker utility, Driver
code for the MPC5606B and Example
projects to help you to get started with the
Fast Start Kit.
• MPC560xB/C/D series MCU
(144-pin LQFP)
• On-board JTAG connection via open
source OSBDM circuit using the
MPC9S08JM MCU
See
pemicro.com/osbdm
for
source code
• MCZ3390S5EK system basis chip
with advanced power management
and integrated CAN tranciever and
LIN 2.0 interface
• CAN interface
• LIN interface
• Analog interface with potentiometer
• High-efficiency LEDs
• Serial communication interface
Step-by-Step Installation Instructions
TRK-MPC5606B Features
In this Quick Start Guide, you will learn how to install the software tools
provided in the Fast Start Kit for TRK-MPC5606B installation media,
how to set up TRK-MPC5606B board and run a LED example that
demonstrates all the software tools provided with the installation media.
1