Distributor of NXP Semiconductors: Excellent Integrated System Limited
Datasheet of DEMO908JL16 - BOARD DEMO FOR MC908JL16
Contact us: [email protected] Website: www.integrated-circuit.com
DEMO908JL16 User's Manual
Page 11
4 Hardware Setup
4.1 First Connection
The Demonstration Board is connected to a host PC through a USB port. Connection steps
are listed below in the recommended flow order:
1.
Install all the required system software as described in the previous section.
2.
Make sure the “POWER SEL1” jumper is in the “USB” position.
3.
Insert one end of the USB cable into a free USB port.
4.
Insert the other end of the USB cable into the USB connector on the Demonstration
Board.
5.
The first time the Demonstration Board is connected to the PC, Windows recognizes the
instrument and starts the
“Found New Hardware Wizard”
procedure, asking you to
specify the driver to use for the instrument. On Windows XP (SP2) the following dialog
box will appear.
Select the
“No, not this time”
option and click the
“Next >”
button.
6.
The following dialog box will appear.
14 / 33
14 / 33