manualshive.com logo in svg

NXP Semiconductors SLN-LOCAL2-IOT, Руководство пользователя

Поделиться
Скачать
NXP Semiconductors SLN-LOCAL2-IOT Скачать руководство пользователя страница 81

Figure 92. Usage of secure_app.py and its output with --signed-only option

Program the created boot_sign_image.sb file into the SLN-LOCAL2-IOT kit in the HAB enabled by executing the prog_sec_app.py
script with the --signed-only option. The script performs the following actions and its output is shown in 

Figure 93

:

• It runs the signed flashloader for the configuration.
• It erases the current flash.
• It programs the signed bootstrap, the signed bootloader and local_demo, the application image-signing certificate, the CA

image certificate, and the device key and certificate.

• It jumps into the bootstrap and executes.
• It waits until the flow gets to local_demo.

 

The spcripts use the file names specified in the Scripts/ sln_local2_iot_config/board_config.py folder. For different
file names, update the board_config.py file.

  NOTE  

 

The lock_device.py file should be used only in production, because it disables debugger access.

  NOTE  

NXP Semiconductors

Automated manufacturing tools

SLN-LOCAL2-IOT Developer’s Guide, Rev. 0, 19 April 2021

User's Guide

81 / 87

Содержание SLN-LOCAL2-IOT
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды