NXP Semiconductors
AN12398
Quick start guide to SE050 Visual Studio projects
AN12398
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
Application note
Rev. 1.1 — 20 June 2019
534611
23 / 36
Figure 35. Drag and drop VCOM binary
5. The serial and VCOM ports should be recognized by your Device Manager. To check
that the ports are recognized, follow the steps indicated in
:
a. Unplug the USB cable from the OpenSDA USB port.
b. Plug the USB cable to the OpenSDA USB port.
c. Check that the serial port is recognized in the category
Ports (COM & LTP)
. In
this document, it is recognized as
USB Servial Device (COM7)
but this naming
might change depending on your computer. Therefore, it is important that you
identify which device is recognized at the moment you plug the SDA USB port to
the computer.
d. Plug the USB cable to the K64F USB port.
e. Check that the VCOM port is recognized in the category
Ports (COM & LTP)
.
In this document, it is recognized as
Virtual Com Port (COM8)
but this naming
might change depending on your computer (e.g. It could also appear named as
USB Serial Device
). Therefore, it is important that you identify which device is
recognized at the moment you plug the K64F USB port to the computer.
