NXP Semiconductors SBC-S32V234, Быстрый старт, Страница: 6 / 27

EXTERNAL USE 5
Out-of-box experience: SBC-S32V234 2 of 2
1
Connect Power Supply and USB Cable
Connect board with 12V/2A DC power supply. Keep the board
power off.
Connect one end of the USB cable to the PC and the other end to
the micro-B connector on the SBC-S32V234 board. Allow the PC to
automatically configure the USB drivers.
2
Install and Start Serial Terminal
Install and open any serial terminal (e.g. TeraTerm, Putty etc.).
Select the port where board is connected and configure it to 115200
baud rate, 8 data bits, no parity and 1 stop bit.
3
Insert the SD card and Power on the Device
The box contains SD card loaded with Linux BSP. Please make sure
it is inserted into SD card slot.
Power on the device by pressing Power Button.
You can now see SBC-S32V234 booting U-boot followed by Linux in
the terminal window.
4
Learn More About the SBC-S32V234
Access release notes and documentation at
nxp.com/SBC-S32V234
nxp.com/S32V234
Power
Button