• 12 V system application; supply
voltage range from 8 V to 16 V
• Up to 250 W input power at
13 V supply voltage
• Supports BLDC/PMSM sensorless
FOC control, both dual shunt
and single shunt
• Robust and fast start up, meets the
strict start up condition < 150 ms
from standstill to the rated speed
for fuel pump motor
• Supports speed command from
LIN/PWM/FreeMASTER (default
setting is FreeMASTER)
• Supports multiple diagnose and
protection covering UV, OV, OT,
OC, short, stall detection, etc.
• Not only supports fuel pumps, but
also suitable for other automotive
BLDC/PMSM applications
Firstly, install CodeWarrior
®
Development
Studio V11 or a newer version for the
S12Z MagniV
®
device.
Secondly, install FreeMASTER Run-time
debugging tool used to tune the motor.
2
Connect the cable and a
debugger like PE Multilink
Connect power supply cables and
fuel pump or other 3-phase BLDC/
PMSM cables to the board. Connect
the PE Multilink debugger to BDM
port (J1) onboard and another end to
the PC. Connect an SCI to USB wire
(FreeMASTER) to UART port (J4) PIN2,
PIN3 and PIN4 and another end to the
PC USB port.
S12ZVM-EFP RDB FEATURES
STEP-BY-STEP INSTRUCTIONS
1
Download
Software
Download installation software
and documentation
at
nxp.com/S12ZVM-EFP
.
Quick Start Guide
4