4
5
Quick Start Guide
www.nxp.com
2
Open the Application
Software
Download
and open the file up-down-
no-antipinch.mcpwith CodeWarrior
Development Studio for HCS12(X).
3
Connect the
Board
Connect a 12 V automotive battery and
a brushed DC motor to the board. For
details, refer to the section titled, “Step-
By-Step Board Connection.”
4
Download the Software to
the S12VR64 MCU Flash
Connect an HCS12(X) external debugger
to the computer and then connect the
debugger to J6. Follow the operating
system messages to install the debugger
drivers. Flash the application by pressing
the debug button on CodeWarrior.
Follow the debugger instructions to flash
the MCU.
INTRODUCTION
SOFTWARE TOOLS INSTALLATION
The S12VR32 EVB features the S12VR32 microcontroller, an automotive 16-bit MCU
for applications based on motor control relays. The S12VR32 evaluation board
integrates an S12 CPU, a LIN physical interface, a 5 V regulator system to supply the
microcontroller and low-side drivers to control the relay.
This ultra-low-cost development platform also includes a Hall sensor interface, an
external 16 MHz oscillator, a switch button and an onboard OSBDM.
1
Install CodeWarrior
®
5.1
Development Studio
CodeWarrior is a complete
integrated development
environment (IDE) that provides
a highly visual and automated
framework.
Download the CW5.1 from
nxp.com/codewarrior
.
