www.nxp.com
STEP-BY-STEP INSTRUCTIONS
1.
Connect the S08PT60-EVK to a PC using the included micro USB cable to power/
OSBDM micro USB connectors (J7) of S08PT60-EVK board. A green LED (D5) will
illuminate, indicating power is on.
2.
The S08PT60-EVK comes pre-programmed with a demo which leverages the on-board
accelerometer. When the board is lying flat, the RGB LED (D1) is turned off. When the
board is tilted, the red or blue LEDs will gradually illuminate based on the degree
of tilt.
3.
J6 is the BDM header which can be used to debug/program S08PT60 by the debugger
P&E Multilink FX or P&E Multilink.
4.
J5 must be open when using P&E Multilink FX to supply power and debug/program
S08PT60.
5.
Explore more out-of-box demos and download software and tools at
www.nxp.com/S08PT60-EVK
.
Содержание S08PT60-EVK
Страница 1: ...Quick Start Guide S08PT60 EVK...