MPC8308NSG Quick Start Guide
21
Appendix B
This section describes the steps required to demonstrate the VoIP capability of the Reference Platform using
multimedia IP phones.
1.
Follow the basic setup instruction as described in
VoIP
section (Page 16).
2.
Set up the multimedia IP phones in similar way as regular IP phones by following the steps 2
– 6 on page 17.
3.
Calling from one multimedia IP phone to the other multimedia IP phone
a.
Check for the dial tone on the phones.
b.
Press the line selection button and then press F2 to select line 2 (shown in figure below).
c.
Enter the extension number of the other phone and press Call button.
Figure 20: VOIP setup
Once both phones are able to call each other, the demo is complete.
Line
selection
Line 2
