NXP Semiconductors PCF2131-ARD, Руководство пользователя, Страница: 14 / 31

NXP Semiconductors
UM11597
PCF2131-ARD evaluation board
User Guide available at https://www.nxp.com/design/development-boards/i-mx-
evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK .
Figure 8. PCF2131-ARD daughterboard and IMXXRT1050 EVK board, before getting started
To configure the hardware and workstation, complete the following procedure:
• Configure the suitable power configuration of EVK (J1). If using J28 for power supply,
the J1 jumper is placed in position 5-6. If using an external power supply (connected to
J2), the jumper J1 is placed in position 1-2.
• Insert the PCF2131-ARD daughtercard on the Arduino connector of the EVK (see
Figure 8 ).
• Using USB connector J28, connect the EVK board to a USB port of the computer.
•
Install the IMXRT1050 target firmware (download from NXP site and see UM11581,
Arduino Arduino shields GUI and firmware installation manual for step-by-step
instructions).
• Install GUI application (see UM11581, Arduino shields GUI and firmware installation
manual ).
• Open the GUI application to operate the device from the PC. For details regarding GUI
operation see Section 7 .
Figure 9 shows the boards during the operation.
UM11597 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1.0 — 15 September 2021
14 / 31