manualshive.com logo in svg

NXP Semiconductors PCA9959HN-ARD, Руководство пользователя, Страница: 5 / 32

Поделиться
Скачать
NXP Semiconductors PCA9959HN-ARD Скачать руководство пользователя страница 5

NXP Semiconductors

UM11623

PCA9959HN-ARD evaluation board

5 Getting to know the hardware

5.1 PCA9959HN-ARD features

•

Combined Arduino port/Fuji connector for data and power

•

Multiple board connections in stack architecture

•

Onboard LEDs for all 24 outputs of the DUT IC

•

Onboard jumpers for LED connection, and short tests

•

Onboard connectors for external LEDs

•

Fully compliant with IMXRT1050 EVK board, including GUI (Windows 10)

•

Fully compliant with LPCXpresso55S69 development board, including GUI (Windows

10)

•

Compliant with 8MMINILPD4-EVK board, including GUI for Windows 10 (see Note)

Note: 

 i.MX Mini LPDDR4 EVK boards require the use of an IMX8MMINI-IARD interposer

board between the EVK and PCA9959HN-ARDUINO daughter board (see IMX8MMINI-

IARD User Manual).

5.2 Kit featured components

Figure 1

 shows the top silkscreen of the board,

See 

Figure 2

 and 

Figure 3

 for top and bottom view of the PCA9959HN-ARD daughter

card. The following figures allow users to quickly find the location of the board

components involved in test and measurement evaluations. The Arduino port connectors

(J5, J6, J35, J36) are located on the bottom side of the board.

Figure 1. PCA9959HN-ARD silkscreen (top view)

UM11623

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

User manual

Rev. 1 — 21 May 2021

5 / 32

Содержание PCA9959HN-ARD

































Отзывы:

Нет отзывов