NXP Semiconductors PCA9955BTW-ARD Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 38

NXP Semiconductors PCA9955BTW-ARD Скачать руководство пользователя страница 32

NXP Semiconductors

UM11761

PCA9955BTW-ARD evaluation board

Figure 27. Graphical interface – Channels / Gradation tab activated

Figure 28. Graphical interface – Channels / Define tab activated

8 Operation example

This section details the necessary steps to operate the PCA9955BTW-ARD

daughterboard with one of three EVKs from the GUI. This will help the user for a quick

test of the board, and a guidance to understand the register functionality. After the

hardware and GUI software was installed, follow the below steps, to turn on and off one

or more LEDs, located on the PCA9955BTW-ARD daughterboard:

1. Open the “NXP_GUI (PCA995x)” application on the PC.

2. In the Board Setting section, from Select EVK list, select the EVK used in the setup.

UM11761

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2022. All rights reserved.

User manual

Rev. 1.0 — 18 March 2022

32 / 38

«
...
30
31
32
33
34
...
»

Содержание PCA9955BTW-ARD







































Отзывы:

Нет отзывов