NXP Semiconductors PCA9420UK-EVM, Руководство пользователя, Страница: 10 / 26

NXP Semiconductors
UM11216
PCA9420UK-EVM evaluation board user manual
UM11216 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 1.2 — 11 March 2020
10 / 26
7 Jumper and switch definitions
Figure 3 shows the location of jumpers and switch on the evaluation board.
Figure 3. Jumper and switch locations for PCA9420UK-EVM
Table 2 describes the function and settings for each jumper and switch.
Table 2. Jumper and switch definitions
Jumper/
Switch
Description Setting Connection/Result
SW1 ON Open
Connect ON pin to ground when
pressed. Causes wake-up event of
PMIC
J5 FTDI-CTRL
I
2
C interface connection with FTDI cable.
Orange color for SCL, Yellow and Green
color for SDA
J6 Voltage monitor
Measure voltages for PCA9420UK
1: VBAT
2: BUCK2 output
3: BUCK1 output
4: LDO2 output
5: LDO1 output
[1-2] Logic high
J7
Logic configuration for
MODESEL0
[2-3] Logic low