P1010RDB-PB Quick Start Guide, Rev. 0
2
Freescale Semiconductor
Getting Started
Figure 1. P1010RDB-PB Board
1.1
Noteworthy Items
•
The default uboot image, dtb, Linux kernel and file systems are loaded in NAND flash.
•
32 MB NOR Flash is split into two banks by SW1[8] switch.
2
Getting Started
This section explains:
•
Section 2.1, “Preloaded Binaries on the Board
•
Section 2.2, “Default Booting Method and Switch Settings
•
Section 2.3, “Booting the Board
2.1
Preloaded Binaries on the Board
The P1010RDB-PB kit contains:
•
On-board NAND Flash loaded with early release image files: